The BadgeRAE personal gas detector provides 2 years of low-cost, continuous, and maintenance-free protection from exposure to Hydrogen Sulfide (H₂S) or Carbon Monoxide (CO).

The zero-maintenance BadgeRAE does not require calibration, but prudent safety procedure dictates periodic challenges with CO or H₂S gas. Only the BadgeRAE provides a bump alert warning with a “Test” message on the display to remind users to “bump” the detector with gas to verify the performance of the sensor and electronics. This procedure is quick and easy and resets the “Test” message.



Key Features
 

	•	2 years of continuous protection
	•	Once activated BadgeRAE is always on and monitoring
	•	No Maintenance (no battery replacement, sensor replacement, calibration)
	•	Large, easy-to-read LCD display
	•	One-button integrity self tests, including alarm function, operational life remaining, alarm limits, and peak reading over 24 hours
	•	Rugged housing made of durable, impact resistant, carbon loaded ABS that is highly resistant to RFI interference and is IP-55 rated weatherproof
	•	Small enough to be clipped onto a hard-hat, shirt pocket, shoulder-strap, or belt
	•	Pre-set low and high alarms
	•	Bright LED alarm light
	•	Loud buzzer
	•	Standard built-in vibration alarm

Applications
 

	•	Refineries
	•	Oil production
	•	Contractors
	•	Turnarounds
	•	Scheduled plant maintenance
	•	Chemical plants
	•	Fire service
	•	Industrial safety
	•	Pulp mills
	•	Heavy industry

Downloads
 

BadgeRAE Data Sheet (456 KB)

Training Documents

 

Basic Operation (1.7 MB)

Application Notes

 

AP-202: The ABC's of Gases in the Industry (150 KB)

Technical Notes

 

			TN-114: Sensor Specifications and Cross Sensitivities (229 KB)
			TN-121: CO Sensor Cross-Sensitivity and Removal with Charcoal Filter (134 KB)
			TN-161: Intrinsic Safety and Hazardous Locations (163 KB)